考虑土壤水平衡的灌区水资源优化配置研究

针对内蒙古河套灌区解放闸灌域地下水埋深较浅且矿化度高及黄河水量逐年减少等因素导致的农业用水严重短缺问题,本研究以解放闸灌域玉米为研究对象,耦合Jensen模型与土壤水平衡模型构建灌区尺度灌溉水资源优化配置模型,对不同的地下水埋深及土壤含水量情景下水资源优化配置方案进行研究,并利用Lingo软件编程求解模型。结果表明:当地下水埋深为2.5m时,引黄水量为3.85×10~8 m~3,可以达到5.55×10~8元的净经济效益;而土壤水含量为0.12～0.16时,净经济效益为[5.41,5.67]×108元。优化结果验证了模型在当地可行,并针对河套灌区解放闸灌域的不同土壤含水量与地下水埋深情景分别提供14种配水方案。     

四端法土壤电导率传感器恒流源设计与试验

土壤信息对于指导农业生产有着极为重要的作用，土壤电导率反映了土壤含水量、盐分、粘粒含量和类型等土壤信息，准确获取土壤电导率对于实现农业精细化生产意义重大。在各种土壤电导率测量方法中，四端法因其成本低、精度高、测量快速和操作简便而大量应用于实际测量；恒流源是四端法测量仪器的重要组成部分，其性能直接决定着测量仪器的精度以及测量范围。本文对比了3种恒流源对测量仪器测量性能的影响，发现采用Howland恒流源的四端法测量仪器高电导率测量能力强而低电导率测量范围较小，测量精度最高；采用改进型Howland恒流源的四端法测量仪器低电导率测量范围有所扩大，测量精度良好；采用基于差动放大器的恒流源的电导率仪低电导率测量范围最大，高电导率测量范围较优，测量精度良好。     

超高效液相色谱—串联质谱法检测鸡血液样品中喹诺酮类药物残留

旨在建立鸡血液样品中多种喹诺酮类药物残留的超高效液相色谱—串联质谱方法。样品经乙腈提取,经Waters Acquity UPLC BEH C₁₈色谱柱分离,以甲醇和0.1%甲酸水溶液为流动相进行梯度洗脱,电喷雾正离子（ESI⁺）模式电离,MRM扫描模式检测。经方法学验证,该方法的线性关系、回收率、精密度均符合要求。应用超高效液相色谱—串联质谱法建立了鸡血液样品中多种喹诺酮类药物同时检测的方法,实现了动物血液样品中12种喹诺酮类药物同时定性、定量分析。     

提取方法对库尔勒香梨果实表皮蜡质提取效果的影响

以库尔勒香梨为试材，三氯甲烷和正己烷为提取剂，采用常温法、加热法和常温加热组合法提取香梨果实表皮蜡质，探讨香梨果皮蜡质的提取方法，为研究香梨果皮蜡质结构及成分提供基础。结果表明：以三氯甲烷为提取剂的效果明显优于正己烷，采取常温结合加热法提取表皮蜡质的含量最高，常温法提取的蜡质含量最低。扫描电镜观察结果表明：采用常温加热结合法，以三氯甲烷作溶剂可充分提取香梨表皮蜡质，而正己烷提取果实表皮呈不明显网状结构，仍有晶体残留；采用加热法，以三氯甲烷提取香梨果实表皮蜡质后，表皮蜡质有小部分残留，而正己烷提取后残留晶体较三氯甲烷提取后多，有不规则的小粒状晶体残存；用常温法则两种溶剂均不能将香梨表皮蜡质提取干净。综合提取蜡质含量和扫描电镜分析的结果得出，以三氯甲烷为溶剂、采用常温加热结合法是有效且易行的提取库尔勒香梨表皮蜡质的方法。     

蔬菜幼苗叶面积快速测定方法筛选与优化

为得到一种快速且准确测定蔬菜幼苗叶面积的方法,以番茄幼苗为试材,以方格法为对照,研究扫描分析法、叶面积仪法、打孔称重法测定叶面积的准确性、精确性与测定速度,然后采用黄瓜、辣椒叶片及纸片的面积对测定结果进行验证,最后基于不同扫描分辨率对筛选出的方法进行优化。结果表明,相比叶面积仪法和打孔称重法,扫描分析法测定结果更接近真实值,且精度更高,用时更短。扫描分析法不同分辨率下测定结果无显著差异,且扫描分辨率越低所需测定时间越短。扫描分辨率50 dpi下的扫描分析法可作为一种快速准确测定蔬菜幼苗叶面积的方法。     

Age estimation of different tree species using a special kind of an electrically recording resistance drill

The determination of tree age is an important issue for urban green planning, forestry and dendrology; finding non-destructive and quasi-non-destructive methods for this purpose is of great theoretical and practical importance. The resistance drilling method is quasi-non-destructive because the average diameter of an opening that remains after drilling does not exceed 3 mm. Do electrically recording resistance drills allow precise assessment of tree age? The aim of this study is to assess the accuracy of determining the number of tree rings based on an examination of this special kind of drilling resistance profiles for three tree species, the pine Pinus sylvestris L., the oak Quercus robur L., and the birch Betula pendula ROTH. In 2015 and 2016, 15 pine trees, 15 oak trees, and 15 birch trees were randomly selected. For each studied tree, a measurement was conducted using the electrically recording resistance drill IML-Resi E400 with a flat-tipped 1.5/3 mm steel needle (research sample), and an increment core was taken (reference sample). The drill used was not a real Resistograph^®. The analysis of the E400-profiles underestimated the number of tree rings; the mean bias error (MBE) values were –6.5, –2.5, and –6.0 years for pine, oak, and birch, respectively. The proportion of investigated trees with less than five years difference between the research and reference samples varied from 38.4 (birch) to 66.7 (oak) percent. The accuracy of tree age determination was lowest for birch and highest for oak. The binomial generalised linear model (GLM) revealed that the most accurate tree age assessments were obtained from tree rings wider than 2 mm. The measurements clearly showed that the electrically recording resistance drill IML-Resi E400 enables a quick, although approximate, tree age assessment. Future research should concentrate on electronically regulating and recording drills, providing a higher spatial and signal resolution, and a stronger correlation to wood density.     

Compatibility of root growth and tuber production of potato cultivars with dynamic and static water‐saving irrigation managements

The important root characteristics of root length density (RLD) and root mass density (RMD) generally differ among irrigation managements and potato cultivars. The objective of this study was to investigate the RLD and RMD variations and their functional relationships with gross potato tuber yield for two commercial potato cultivars, Agria and Sante, under different irrigation strategies. Full irrigation and water‐saving irrigation strategies, deficit and partial root drying irrigations, were applied statically (S) and dynamically (D) based on daily crop evapotranspiration. Results showed that SPRD had significantly greater RLD (3.64 cm/cm³) and RMD (132.7 μg/cm³) than other irrigation treatments. Between the potato cultivars, Agria had significantly larger values of RLD (3.50 cm/cm³) and RMD (138.7 μg/cm³) than Sante. The functional relationship between the root growth characteristics and tuber yield showed that under water‐saving irrigations, Agria increased root mass at the expense of gross tuber yield but Sante increased root mass to maintain larger gross tuber yields. However, Agria produced more roots and gross tuber yield than Sante, and it is concluded that Agria is a more drought‐tolerant potato cultivar, which is recommended for tuber production in regions where water might be scarce. It was shown that larger root production in potatoes was associated with improved tolerance to water stress.     

菠萝蜜种子淀粉制备香草兰微胶囊的工艺研究

以菠萝蜜种子淀粉为壁材,采用饱和水溶液法制备香草兰精油微胶囊,以包埋产率为指标,采用响应面分析法对微胶囊的包埋条件进行优化探讨。结果表明:5个单因素中,影响最显著的因素为壁芯材比例、包埋温度和包埋时间。响应面优化得到香草兰精油微胶囊的最佳工艺条件为壁芯材比例为7.5∶1;包埋时间72 min;包埋温度54℃,此条件下的包埋产率为(95.46±0.2)%,包埋率为(76.35±0.6)%,载油量为(27.73±0.3)%。试验证明,此条件结果与模型预测值相吻合,此工艺条件可为菠萝蜜种子淀粉包埋香草兰精油微胶囊工艺提供理论依据。     

香蕉中噻唑膦残留分析方法研究

建立香蕉中噻唑膦的超高效液相色谱串联质谱法(UPLC-MS/MS)残留测定方法。香蕉样品采用乙腈提取和PSA+C18分散固相萃取,采用UPLC-MS/MS多反应模式(MRM)进行分析测定。噻唑膦在添加水平0.01~1.0 mg/kg范围内,平均回收率为94.3%~107.5%,相对标准偏差为7.9%~11.0%。采用外标法定量,方法的检出限为0.001μg/m L,定量限为0.005 mg/kg。该方法简单、准确、重复性较好且节省溶剂,适用于香蕉中噻唑膦的残留检测。     

A new lean no time test baking method with improved discriminating power

In response to customer concerns related to gluten strength in commercial baking, the Canadian Grain Commission assessed whether the Canadian Short Process (CSP) test bake method was generating useful data related to intrinsic strength of wheat varieties. Assessment of CSP loaf volume data for Canadian variety trials spanning 2003 to 2013 showed very little correlation with dough strength parameters as measured by farinograph and extensigraph. A lean no time (LNT) test baking method was developed that can better discriminate genotypes and provide objective indicators of the effect of intrinsic dough strength on baking quality. From early method development, through method validation and verification using diverse sets of samples targeting different Canadian wheat classes and grown in three different crop years, results showed the LNT method to be more discriminating and easily adopted by other laboratories. In 2015, the LNT method was adopted as the method of choice in future Canadian variety registration trials. The LNT method is fast, simple and well-suited to high throughput test baking conditions encountered in the evaluation of large numbers of breeder lines. A new objective parameter, loaf top ratio, was also introduced and found to correlate well with dough strength and dough handling properties.